Aspiration for excellence
Aviaavtomatika   /   Product catalogue   /   Industrial purpose products   /   General-industry and explosion-proof electric actuators   /

Control units of electric actuators

Are intended for electric actuators and electric execution mechanisms (EEM) control.


Control unit of quick-shutoff actuator BUPU

Control unit of quick-shutoff actuator BUPU

BUPU is intended for reception of control commands “OPEN” (“LOCK”) from APCS or from CB and organization of its execution by quick shutoff electric mechanism.

Emergency protection unit for quick-shutoff actuator BAZ-01M

Emergency protection unit for quick-shutoff actuator BAZ-01M

Emergency protection unit of BAZ-01M ensures automatic operation of quick-shutoff actuator in case of outage of mains voltage supplying the electric actuator for more than 3 seconds.

Control unit of quick-shutoff actuator BUP-M

Control unit of quick-shutoff actuator BUP-M

BUP-M is intended for reception of control commands “OPEN” (“LOCK”) from APCS or from CB and organization of its execution by quick shutoff electric mechanism. Besides, the unit ensures automatic valve locking at mains power supply outage for more than 3 seconds. BUP-M unit possesses functions of two previous generation units – control unit (BUPU) and emergency protection unit (BAZ-01M), therefore it is not required to apply BAZ-01M unit when using BUP-M.

Control unit of quick-shutoff actuator BUPU-N

The unit is applied in combination with quick-shutoff electric mechanism of MBOV type, having letter “N” at the end of designation.

Local control console of shutoff and regulating EAM MPU-RM1

Local control console of shutoff and regulating EAM MPU-RM1

MPU-RM1 is an interfacing device between APCS and shutoff and regulating electric actuating mechanism (EAM). Application of reversing starter of PBR type is not required, because MPU-RM1 has contactless commutator in its composition. All three supply phases of the actuating mechanism engine are commutated.

Local control console of shutoff actuator PU-1

Local control console of shutoff actuator PU-1

PU-1 is an interfacing device between APCS or CB and shutoff electric actuator. Application of reversing starter of PBR type is not required, because PU-1 has contactless commutator in its composition, commutating all supply phases of the actuator electric engine.

Control unit of MBO(V)-63/1-0,25-01 quick-shutoff mechanism BUP MBO-63/1-0,25-01

Is intended for control commands reception “OPEN” (“LOCK”) from APCS or CB and organization of its operation by the quick-shutoff electric mechanism.

Control unit of MBO(V)-63/1-0,25U-01 quick-shutoff mechanism BUP MBO-63U-01

Is intended for control commands reception “OPEN” (“LOCK”) from APCS or CB and organization of its operation by the quick shutoff electric mechanism.

Control unit to MZO-125/25-0,25 (MZOV-125/25-0,25) electric actuator BUP MZO-125

Control unit to MZO-125/25-0,25 (MZOV-125/25-0,25) electric actuator BUP MZO-125

The unit is intended for using together with MZO-125/25-0,25 or MZOV-125/25-0,25 electric mechanism.

Control unit of linear mechanism of MEP-15000PCH type BUP MEP-PCH

Control unit of linear mechanism of MEP-15000PCH type BUP MEP-PCH

Is intended for control commands reception “OPEN” (“LOCK”) from APCS or CB and organization of its operation by the quick-shutoff electric mechanism.

About the company
Press-center
Product catalogue
Manufacturing and technologies
Contacts
  • Address:  47 Zapolnaya str., 305040, Kursk, Russia
  • Telephones:  +7 (4712) 57-65-56, 57-69-55
  • E-mail:  plant@aviaavtomatika.com

© “Aviaavtomatika” named after V.Tarasov” JSC, 2004–2019